B-1.1, r. 6.1 - Regulation respecting pressure installations

Section 64 Disposition versions

2018-03-08

64. A safety device must be repaired or replaced in the following cases:

(1)  the device is leaking, is cracked, does not operate in a satisfactory manner or has a broken seal;

(2)  the outlet, outlet piping or piping linking the device to a pressure installation is blocked or the opening shows a risk of burn or injury;

(3)  in the case of a valve, rust deposits have accumulated between the seat and the disk or the seat and the disk are stuck.

O.C. 89-2018, s. 64.

Not in force

In force: 2018-03-08

64. A safety device must be repaired or replaced in the following cases:

(1)  the device is leaking, is cracked, does not operate in a satisfactory manner or has a broken seal;

(2)  the outlet, outlet piping or piping linking the device to a pressure installation is blocked or the opening shows a risk of burn or injury;

(3)  in the case of a valve, rust deposits have accumulated between the seat and the disk or the seat and the disk are stuck.

O.C. 89-2018, s. 64.